Aeon Labs Multisensor Temperature

  • 120 Views
  • Last Post 13 December 2015
nigel1705 posted this 17 January 2015

Hi,

I have an Aeon Labs 4 in 1 multisensor. It is powered over USB, and appears to function fully.
The issue I have is when the temperature drops below 0 centigrade, the read out shows numbers in the 6000's.
Is there an easy fix for this using the InControl software, or is it just the way the Multisensor works?

Thanking you in anticipation,

Regards,
Nigel.

Order By: Standard | Newest | Votes
Ryan-Scott posted this 18 January 2015

Hi,

I have an Aeon Labs 4 in 1 multisensor. It is powered over USB, and appears to function fully.
The issue I have is when the temperature drops below 0 centigrade, the read out shows numbers in the 6000's.
Is there an easy fix for this using the InControl software, or is it just the way the Multisensor works?

Thanking you in anticipation,

Regards,
Nigel.


Which version of InControl are you on?

nigel1705 posted this 18 January 2015

Hi,

My Incontrol software version is 3.126.5305.30731 - Standard Edition.

Regards,
Nigel.

lewan posted this 23 November 2015

[quote=nigel1705]Hi,

I have an Aeon Labs 4 in 1 multisensor. It is powered over USB, and appears to function fully. The issue I have is when the temperature drops below 0 centigrade, the read out shows numbers in the 6000's. Is there an easy fix for this using the InControl software, or is it just the way the Multisensor works?

Thanking you in anticipation,

Regards, Nigel.[/quote]

Same here..... http://piclair.com/data/dn3sw.jpg

Aeon Labs 6 in 1 multisensor InControl 4.0.5640 and 4.0.5799.

rscott posted this 23 November 2015

[quote=lewan]Hi,

I have an Aeon Labs 4 in 1 multisensor. It is powered over USB, and appears to function fully. The issue I have is when the temperature drops below 0 centigrade, the read out shows numbers in the 6000's. Is there an easy fix for this using the InControl software, or is it just the way the Multisensor works?

Thanking you in anticipation,

Regards, Nigel.

Same here..... http://piclair.com/data/dn3sw.jpg

Aeon Labs 6 in 1 multisensor InControl 4.0.5640 and 4.0.5799.[/quote]

Does the large number appear when your sensor is reporting F instead?

lewan posted this 23 November 2015

[quote=rscott]Hi,

I have an Aeon Labs 4 in 1 multisensor. It is powered over USB, and appears to function fully. The issue I have is when the temperature drops below 0 centigrade, the read out shows numbers in the 6000's. Is there an easy fix for this using the InControl software, or is it just the way the Multisensor works?

Thanking you in anticipation,

Regards, Nigel.

Same here..... http://piclair.com/data/dn3sw.jpg

Aeon Labs 6 in 1 multisensor InControl 4.0.5640 and 4.0.5799.

Does the large number appear when your sensor is reporting F instead?[/quote]

Yes! Around 11 813 Fahrenheit.... :)

Change from C to F in InControl, dont know how to change it in the sensor... From Aeon labs manual "The unit is Fahrenheit for US version, Celsius for EU/AU version".

lewan posted this 13 December 2015

Still not working with version 4.0.5817.

http://piclair.com/data/e4nxb.jpg http://piclair.com/data/v4k83.jpg

lewan posted this 13 December 2015

[quote=lewan]Still not working with version 4.0.5817.

http://piclair.com/data/e4nxb.jpg http://piclair.com/data/v4k83.jpg[/quote]

Update!

I have one of this, and it works outside! (Philio Door sensor - PST02-1A) http://www.incontrolha.com/devicelibrary/viewDevice/52/Philio-4-in-1-Multi-Sensor

http://piclair.com/data/hunue.jpg

So InControl seems not to have 100% support for Aeon Labs Multisensor 6.... yet!

Close