The LSM-15 doesn't seem to autoconfig or associate to the controller. Does that sound right?
The LTM-5 aux switches associate to the LSM-15 and all works like I want it to....
Best 3-way 4-way switch combinations
- 179 Views
- Last Post 13 January 2015
jschiesser
posted this
04 January 2015
Ryan-Scott
posted this
05 January 2015
Are these the right switches?
Main Load controlling device - Linear WS15Z-1 Z-Wave Wall Switch
http://www.amazon.com/dp/B00E1OQN8Y/ref=wlitdpopCnSttl?encoding=UTF8&colid=3UU0F7WLG0SCX&coliid=I3K40G5IN6WMEA
Additional Aux switches - Evolve LTM-5 120 VAC Wall Mount Accessory Switch
http://www.amazon.com/dp/B008OF8CJO/ref=wlitdpopCnSttl?encoding=UTF8&colid=3UU0F7WLG0SCX&coliid=I3TTMD8P7X8XO6
Yes, those will work. That aux switch isn't a true 3/4-way though, but it's much easier to setup. All you need to do is provide power to them and then use associations to get them to send commands to your main WS15z-1 device.
Btw, contact me via our support site (http://incontrolha.uservoice.com) and I can get you special pricing on those items.
jschiesser
posted this
06 January 2015
I ended up ordering a LSM-15 (main switch) and a couple of LTM-5's from Amazon, I'll reach out next time!
jschiesser
posted this
13 January 2015
The LSM-15 doesn't seem to autoconfig or associate to the controller. Does that sound right?
The LTM-5 aux switches associate to the LSM-15 and all works like I want it to....
Axial-User
posted this
13 January 2015
That is how mine are set up. The 15 just works like a normal switch, then my 5's were associated with it. The 15 doesn't seem to support autoconfig or associations. I used mirroring in InControl though to mirror the 15 back to the 5 (even though it wasn't necessary). Just seemed weird when I would switch OFF the 15, but the 5 still showed it was ON. I also hid the 5 in InControl since it's the 15 that actually controls the load.
jschiesser
posted this
13 January 2015
That is how mine are set up. The 15 just works like a normal switch, then my 5's were associated with it. The 15 doesn't seem to support autoconfig or associations. I used mirroring in InControl though to mirror the 15 back to the 5 (even though it wasn't necessary). Just seemed weird when I would switch OFF the 15, but the 5 still showed it was ON. I also hid the 5 in InControl since it's the 15 that actually controls the load.
I noticed same thing on the 15 vs. 5 status display, I also just hid them on my mobile device list. I also have noticed I can't get the scheduled poll to work on the 15 unless I check the "Smart Route" option. This is an issue when I manually turn the switch on it doesn't ever show up as on until I did that.
