Cooper Wiring Multilevel Switch

  • 88 Views
  • Last Post 11 July 2014
hdrider465@gmail.com posted this 08 July 2014

I have picked up one of the cooper wiring RF9500 Multi Level switches. Was hoping to use this a dimmer control for my central music system volume.
I can get the device to pair but only shows up as a binary Sensor. I can get the On/Off to work but not the dimmer? Any ideas anyone?

Thanks
Jim

Order By: Standard | Newest | Votes
jonfrance posted this 11 July 2014

I can get the device to pair but only shows up as a binary Sensor. I can get the On/Off to work but not the dimmer? Any ideas anyone?


You should be able to change the device to a dimmer manually in the drop down device types (top right under the device name after you select the device).

hdrider465@gmail.com posted this 11 July 2014

I can get the device to pair but only shows up as a binary Sensor. I can get the On/Off to work but not the dimmer? Any ideas anyone?

You should be able to change the device to a dimmer manually in the drop down device types (top right under the device name after you select the device).


I tried that - also tried multisensor. The problem is that there are two switches on this The on/off and the dimmer. The On/Off switch is the only one that gets paired. Cant seem to get the dimmer switch to get recognized.

jonfrance posted this 11 July 2014

Sorry not sure then.... the only other thing I can think to try is running the Auto-Configuration on the device and see if that sets it up correctly in InControl.

Close