Is there a way to set the wake up interval (usually command class 0x84) from within InC? I have been able to do this from zentools but it is would be easier from within InC.

The reason I ask is that I am trying to set up my various battery devices and I am having problems with most of the reporting values disappearing after a certain amount of inactivity from the software. For example, I have a large number of the older Vision ZP3102 motion sensors with temperature. When you first associate the device they will show all of the parameters (Battery, Temperature, Burglar, and binary_sensor). You can create a device for each to track the sensor readings. Eventually, if the device sits long enough all but the battery will disappear. The created devices will still be in the InC software but all report zeros. You can sometimes re-associate the battery device but this is a pain to do since it won't find the device unless it happens to be awake.

What I am looking for is a method for retaining all of the sensor parameters in InC without needing to constantly re-associate them. Any help would be appreciated.

Note: These are the older ZP3102US sensors with jumpers - not the new ZW+ capable units.