Philio tec PSM02

  • 77 Views
  • Last Post 30 November 2014
Birdtwig posted this 28 April 2014

[quote=Birdtwig]Hello

I get one Philio tec PSM02. A four in one multisensor. It should report Motion, Door, Temp, and Luminance.

The problem is that i can only see Three devices in Incontrol device list. The door and motion sensor are one device.

I can trig the Door/motion either with motion or pull away door magnet.

The only way to "untrig" the motion/door sensor is to sneak in the door magnet without trigging the motion. When i trig the motionsensor it shows trigged in Incontrol like forever.

Anyone with the same Product that manage it to work properly???

http://philio-tech.com/[/quote]

Motion + door? That's a cool idea - could this be a multi-channel device perhaps?

Order By: Standard | Newest | Votes
Ryan-Scott posted this 28 April 2014

[quote=Birdtwig]Hello

I get one Philio tec PSM02. A four in one multisensor. It should report Motion, Door, Temp, and Luminance.

The problem is that i can only see Three devices in Incontrol device list. The door and motion sensor are one device.

I can trig the Door/motion either with motion or pull away door magnet.

The only way to "untrig" the motion/door sensor is to sneak in the door magnet without trigging the motion. When i trig the motionsensor it shows trigged in Incontrol like forever.

Anyone with the same Product that manage it to work properly???

http://philio-tech.com/[/quote]

Motion + door? That's a cool idea - could this be a multi-channel device perhaps?

Birdtwig posted this 28 April 2014

[quote=Ryan Scott]Hello

I get one Philio tec PSM02. A four in one multisensor. It should report Motion, Door, Temp, and Luminance.

The problem is that i can only see Three devices in Incontrol device list. The door and motion sensor are one device.

I can trig the Door/motion either with motion or pull away door magnet.

The only way to "untrig" the motion/door sensor is to sneak in the door magnet without trigging the motion. When i trig the motionsensor it shows trigged in Incontrol like forever.

Anyone with the same Product that manage it to work properly???

http://philio-tech.com/

Motion + door? That's a cool idea - could this be a multi-channel device perhaps?[/quote]

Yes it probably is.

Incontrol identifies it as a binary sensor. The Icon i get looks like a motionsensor with a checkbox named "Tripped/Open". On the right side i get three blue buttons with Temp, Luminance and Battery , they seems to work correctly.

When i trig the motionsensor or pull away the door magnet, the red dot on the motionsensor icon appears. And the checkboxbeing checked.

smboards posted this 30 November 2014

[quote=Birdtwig]The only way to "untrig" the motion/door sensor is to sneak in the door magnet without trigging the motion. When i trig the motionsensor it shows trigged in Incontrol like forever. http://philio-tech.com/[/quote]

This was driving me crazy too but I finally figured out a workaround.

You have to add association for the sensor, associate Group 2 with controller. This sensor send "Lights off" command to group 2 after motion has not been detected for some time (default 24s but you can increase this in parameters). Result is that motion sensor is set to not Tripped in software.

This however does not solve the problem that both motion and magnet are shown as single sensor. We need some configuration file for this sensor but I am not competent enough to create it.

Change Language
Categories
Search
Popular Tags
Hot Topics
Close