Setting Away and home Mode

  • 265 Views
  • Last Post 25 October 2016
a.satyan@gmail.com posted this 23 October 2016

I am using Aeotec USB Gen 5 and have got few inwall dimmers and also switches configured and working well. I wanted to use InControl for home security as well and got the Aeon Labs Gen5 sensors while the sensors is realized there dont seem be be a simple Away and Home mode - any guides on how best to setup the Home and Away mode so that if there is a motion triggered the alarm is triggered.

 

As well i am looking to integrate the DHS (http://www.rkmsmarthome.com.au/store/p107/DHS_Z-Wave_%26_RFID_Wall_Scene_Controller.html)  so that i can set a pin to enable and disbale alarm mode 

Would appreciate the help 

Order By: Standard | Newest | Votes
rscott posted this 25 October 2016

I was going to mention the same method that @wingerco pointed out with the tutorial to do away/home. 

As for the wall controller, I suspect it'll work similar to how a hand-held button controller does. I haven't personally tested a unit, but if you have problems, toss us a support ticket and we'll work with you to get it integrated and working.

 

wingerco posted this 23 October 2016

I will let Ryan answer the question about "Home and Away Modes" but in the mean time there is a tutorial you might be interested in for an alarm system. Here is the link. http://axialcontrol.com/recipes/recipe/2

I use it as my system and it works great. You may be able to integrate all or part of it to create your own system. Hope this helps.

Change Language
Categories
Search
Popular Tags
Hot Topics
Close