Help with Aeon Multi-Switch

  • 349 Views
  • Last Post 23 October 2014
Axial-User posted this 22 October 2014

Ryan,

I am trying to get Josh's Aeon Multi-Switch working with the web UI which is difficult since I don't own one. The problem is that it will turn off the individual channels, but not on. I am setting them by using setDeviceState using the deviceId from the devices output as the nodeId parameter, powered=true and level=255.

The only thing I see that is different in the devices output is that providerDeviceId is ZWave||End Point 2 like a sensor device value ID.

Can you help me out?

Thanks,
Andy

Order By: Standard | Newest | Votes
Ryan-Scott posted this 23 October 2014

Ryan,

I am trying to get Josh's Aeon Multi-Switch working with the web UI which is difficult since I don't own one. The problem is that it will turn off the individual channels, but not on. I am setting them by using setDeviceState using the deviceId from the devices output as the nodeId parameter, powered=true and level=255.

The only thing I see that is different in the devices output is that providerDeviceId is ZWave||End Point 2 like a sensor device value ID.

Can you help me out?

Thanks,
Andy


You might try using the setPower command since it's an on/off value as opposed to a level.

Axial-User posted this 23 October 2014

You might try using the setPower command since it's an on/off value as opposed to a level.


That makes sense. I changed the code, and it still works fine for all my devices, I am waiting to her from Josh to see if it fixed his problem. Thanks Ryan!

Close