Activate Scene with multiple triggers?

  • 61 Views
  • Last Post 04 January 2014
SickPup404 posted this 19 November 2013

I have a lamp I want to turn on and off every day in the morning and at night.

Previously in HomeSeer with my old X10 setup, I used four independent events:
- "On" in AM at a fixed time
- "Off" in AM 30 minutes after sunrise
- "On" in PM 10 minutes before sunset
- "Off" in PM at a fixed time.

To get the same functionality, I know I can set up four scenes and I know how to do that. My question is should I do it a different or "better" way?

Thanks!

Order By: Standard | Newest | Votes
SickPup404 posted this 04 January 2014

Yup, I have something set up very similar to that.

- At the risk of sounding obvious, make sure you have the device set up and have it's status set to "on".
- I used two scenes for mine. Set up the time trigger for the desired time, set to repeat daily.
- Use conditions and set up a day of week condition (drop down arrow), then pick the days.

There might be a way to do it in one scene, but it's just as easy with two scenes in my case.

Hope this helps!

sysmg posted this 02 January 2014

Is it possible to associate triggers with conditions? I want a light to turn on Fridays at 6pm and Saturdays at 4pm. Is it possible to do that with one scene?

I thought I could do a time trigger in group 1 at 6pm and a condition of Friday in group 1. Then I added another trigger in group 2 at 4pm and a condition of Saturday in group 2. The lights never turned on. Should this work? If so how? Using 3.43.5050.17923.

-Stew

NickTT posted this 23 November 2013

I think what you want are the Trigger Groups. When you setup a trigger for the scene you can set what group that trigger is a part of. All triggers in group 1 have to be true for the scene to activate or all triggers in group 2 have to be true to active.

I think that's what you are looking for.

SickPup404 posted this 19 November 2013

Actually, I just completed setting up two scenes:
- "On" for both the AM/PM triggers
- "Off" for both the AM/PM triggers

Let me know if there's a different or better way!

Close