Hi,
I have an Aeon Labs 4 in 1 multisensor. It is powered over USB, and appears to function fully.
The issue I have is when the temperature drops below 0 centigrade, the read out shows numbers in the 6000's.
Is there an easy fix for this using the InControl software, or is it just the way the Multisensor works?
Thanking you in anticipation,
Regards,
Nigel.
Aeon Labs Multisensor Temperature
- 120 Views
- Last Post 13 December 2015
Hi,
I have an Aeon Labs 4 in 1 multisensor. It is powered over USB, and appears to function fully.
The issue I have is when the temperature drops below 0 centigrade, the read out shows numbers in the 6000's.
Is there an easy fix for this using the InControl software, or is it just the way the Multisensor works?
Thanking you in anticipation,
Regards,
Nigel.
Which version of InControl are you on?
Hi,
My Incontrol software version is 3.126.5305.30731 - Standard Edition.
Regards,
Nigel.
[quote=nigel1705]Hi,
I have an Aeon Labs 4 in 1 multisensor. It is powered over USB, and appears to function fully. The issue I have is when the temperature drops below 0 centigrade, the read out shows numbers in the 6000's. Is there an easy fix for this using the InControl software, or is it just the way the Multisensor works?
Thanking you in anticipation,
Regards, Nigel.[/quote]
Same here..... http://piclair.com/data/dn3sw.jpg
Aeon Labs 6 in 1 multisensor InControl 4.0.5640 and 4.0.5799.
[quote=lewan]Hi,
I have an Aeon Labs 4 in 1 multisensor. It is powered over USB, and appears to function fully. The issue I have is when the temperature drops below 0 centigrade, the read out shows numbers in the 6000's. Is there an easy fix for this using the InControl software, or is it just the way the Multisensor works?
Thanking you in anticipation,
Regards, Nigel.
Same here..... http://piclair.com/data/dn3sw.jpg
Aeon Labs 6 in 1 multisensor InControl 4.0.5640 and 4.0.5799.[/quote]
Does the large number appear when your sensor is reporting F instead?
[quote=rscott]Hi,
I have an Aeon Labs 4 in 1 multisensor. It is powered over USB, and appears to function fully. The issue I have is when the temperature drops below 0 centigrade, the read out shows numbers in the 6000's. Is there an easy fix for this using the InControl software, or is it just the way the Multisensor works?
Thanking you in anticipation,
Regards, Nigel.
Same here..... http://piclair.com/data/dn3sw.jpg
Aeon Labs 6 in 1 multisensor InControl 4.0.5640 and 4.0.5799.
Does the large number appear when your sensor is reporting F instead?[/quote]
Yes! Around 11 813 Fahrenheit.... :)
Change from C to F in InControl, dont know how to change it in the sensor... From Aeon labs manual "The unit is Fahrenheit for US version, Celsius for EU/AU version".
Still not working with version 4.0.5817.
http://piclair.com/data/e4nxb.jpg http://piclair.com/data/v4k83.jpg
[quote=lewan]Still not working with version 4.0.5817.
http://piclair.com/data/e4nxb.jpg http://piclair.com/data/v4k83.jpg[/quote]
Update!
I have one of this, and it works outside! (Philio Door sensor - PST02-1A) http://www.incontrolha.com/devicelibrary/viewDevice/52/Philio-4-in-1-Multi-Sensor
http://piclair.com/data/hunue.jpg
So InControl seems not to have 100% support for Aeon Labs Multisensor 6.... yet!