Hello,
I just purchased IncontrolHA Pro software and i set it up using an Aeon Z-Stick 2. I have selected the beta Z-wave drivers and all is fine regarding the controller.
I added a Fibaro Wall Plug and did the auto configuration. I checked the associations and the wall plug is associated with the controller. InControl set up the wall plug as a PowerOutlet.
The ON/OFF function works as intended but i see no energy readings at all. I understand that the readings should be in the right pane when the device is selected. All i see there is PowerOutlet and the yellow Power button.
Can anyone with experience please tell me how to see instant and total power consumption ?
Regards
Claudiu
Fibaro configuration
- 154 Views
- Last Post 08 May 2015
Claudiu
posted this
08 January 2015
coolwei
posted this
08 May 2015
We were sent a device from Remotech that can do IR support - we just need to get it implemented.
Hi Ryan, when will you finish the IR ZXT-310 A/V support?
Claudiu
posted this
17 January 2015
I just wanted to close the thread as all the problems are solved now thank you very much Ryan. Your support was very prompt and good Happy customer now.
Regards,
Claudiu
Claudiu
posted this
16 January 2015
Sent it. Can you check please?
Ryan-Scott
posted this
16 January 2015
please give me an email address so i can send the log
Claudiu
It's probably easiest to use our support site to send in a ticket with your logfile: http://incontrolha.uservoice.com/
Claudiu
posted this
16 January 2015
please give me an email address so i can send the log
Claudiu
Claudiu
posted this
16 January 2015
Hmm no matter hwo many times i create the git is still blank...
heres is the log
16.01.2015 1:32:19: doServiceTest()
16.01.2015 1:32:19: Starting Service
16.01.2015 1:32:19: Should attempt restart: True
16.01.2015 1:32:19: consoleProcess == null: True
16.01.2015 1:32:20: Original FolderC:\Windows\system32
16.01.2015 1:32:20: Changed to:C:\Program Files (x86)\Moonlit Software, LLC\InControl HA
16.01.2015 1:32:20: Starting Service
16.01.2015 1:32:20: Preparing service base
16.01.2015 1:32:20: Original FolderC:\Program Files (x86)\Moonlit Software, LLC\InControl HA
16.01.2015 1:32:20: Changed to:C:\Program Files (x86)\Moonlit Software, LLC\InControl HA
16.01.2015 1:32:20: Config file location: C:\Windows\system32\config\systemprofile\AppData\Roaming\MoonlitSoftware,LLC\MLS.ZWave.Service.exeUrl3rrr3by1xi2j0yuef21xgz0sko14kpmk\4.0.5489.15171\user.config
16.01.2015 1:32:20: Running service base
16.01.2015 1:32:22: Error during getFloorPlanImageAsync - System.ServiceModel.EndpointNotFoundException
There was no endpoint listening at http://localhost:1178/zwave/floorPlanFile that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.
Unable to connect to the remote server
Server stack trace:
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
at System.ServiceModel.Channels.HttpChannelFactory1.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)<br> at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)<br> at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)<br> at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)<br> at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)<br> at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)<br><br>Exception rethrown at [0]: <br> at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)<br> at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)<br> at MLS.InControl.Gui.HaDeviceService.IzWaveSVC.getFloorPlanFile(String password, String imageId)<br> at MLS.InControl.Gui.HaProxy.WebServiceProxy.<>c__DisplayClass70.<getfloorplanimageasync>b__6f() in z:\work\mls\MLS.ZWave.Controller\MLS.InControl.Gui\HaProxy\WebServiceProxy.cs:line 1578<br>16.01.2015 1:32:22: Error during FloorPlanMetaData - System.ServiceModel.EndpointNotFoundException<br>There was no endpoint listening at http://localhost:1178/zwave/floorPlanMeta?password=spectra that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.<br>Unable to connect to the remote server<br><br>Server stack trace: <br> at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)<br> at System.ServiceModel.Channels.HttpChannelFactory1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Mes
Ryan-Scott
posted this
15 January 2015
It is the full log.. just after start it doesn't white anything more to the logfile...
https://gist.github.com/ab5ba751f10bd8c106d7.git
Strange, that gist is blank... ?
Claudiu
posted this
15 January 2015
It is the full log.. just after start it doesn't white anything more to the logfile...
https://gist.github.com/ab5ba751f10bd8c106d7.git
Ryan-Scott
posted this
15 January 2015
So i stopped the service, restarted InControl so i get a clean log file
All devices are still "greyed out". Not even the weather plugin is not doing anything.
What do you mean by grayed out?
Can you do this to get your log (the last one looks like it got cut off):
1- Click the offline button
2- Close InControl
3- Delete the logfile.txt
4- Start InControl, verify that it shows a green online button in the lower right
5- Wait 5 mins, then include the full log using a Gist
Claudiu
posted this
15 January 2015
So i stopped the service, restarted InControl so i get a clean log file
All devices are still "greyed out". Not even the weather plugin is not doing anything.
Here it is:
15.01.2015 18:50:06: doServiceTest()
15.01.2015 18:50:06: Starting Service
15.01.2015 18:50:06: Should attempt restart: True
15.01.2015 18:50:06: consoleProcess == null: True
15.01.2015 18:50:07: Original FolderC:\Windows\system32
15.01.2015 18:50:07: Changed to:C:\Program Files (x86)\Moonlit Software, LLC\InControl HA
15.01.2015 18:50:07: Starting Service
15.01.2015 18:50:07: Preparing service base
15.01.2015 18:50:07: Original FolderC:\Program Files (x86)\Moonlit Software, LLC\InControl HA
15.01.2015 18:50:07: Changed to:C:\Program Files (x86)\Moonlit Software, LLC\InControl HA
15.01.2015 18:50:07: Config file location: C:\Windows\system32\config\systemprofile\AppData\Roaming\MoonlitSoftware,LLC\MLS.ZWave.Service.exeUrl3rrr3by1xi2j0yuef21xgz0sko14kpmk\4.0.5489.15171\user.config
15.01.2015 18:50:07: Running service base
15.01.2015 18:50:09: Error during getFloorPlanImageAsync - System.ServiceModel.EndpointNotFoundException
There was no endpoint listening at http://localhost:1178/zwave/floorPlanFile that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.
Unable to connect to the remote server
Server stack trace:
at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
at System.ServiceModel.Channels.HttpChannelFactory1.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)<br> at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)<br> at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)<br> at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)<br> at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)<br> at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)<br><br>Exception rethrown at [0]: <br> at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)<br> at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)<br> at MLS.InControl.Gui.HaDeviceService.IzWaveSVC.getFloorPlanFile(String password, String imageId)<br> at MLS.InControl.Gui.HaProxy.WebServiceProxy.<>c__DisplayClass70.<getfloorplanimageasync>b__6f() in z:\work\mls\MLS.ZWave.Controller\MLS.InControl.Gui\HaProxy\WebServiceProxy.cs:line 1578<br>15.01.2015 18:50:09: Error during FloorPlanMetaData - System.ServiceModel.EndpointNotFoundException<br>There was no endpoint listening at http://localhost:1178/zwave/floorPlanMeta?password=spectra that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.<br>Unable to connect to the remote server<br><br>Server stack trace: <br> at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)<br> at System.ServiceModel.Channels.HttpChannelFactory1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Req
Ryan-Scott
posted this
15 January 2015
I'm getting crazy with the software :( After yesterday i started to add my devices again, after resetting each device and the stick and installing the new software.. today it looks like:
http://i58.tinypic.com/505rv5.jpg
The other software mentioned about sees all the devices added so far:
http://i58.tinypic.com/15n3rf4.jpg
Can't control anything from Incontrol... can't reach any device, network heal doesn't see any node ..
Please help
Claudiu
Can you include your logfile contents? Also, please make sure the Zentools is turned off before attempting to go online with InControl - otherwise it'll be unable to access the USB stick.
Claudiu
posted this
15 January 2015
I'm getting crazy with the software :( After yesterday i started to add my devices again, after resetting each device and the stick and installing the new software.. today it looks like:
http://i58.tinypic.com/505rv5.jpg
The other software mentioned about sees all the devices added so far:
http://i58.tinypic.com/15n3rf4.jpg
Can't control anything from Incontrol... can't reach any device, network heal doesn't see any node ..
Please help
Claudiu
Claudiu
posted this
14 January 2015
With the new version devices showed up
Thank you
Ryan-Scott
posted this
14 January 2015
Well i didnt get to choose what version i have.. pressed the download button and that was it..
Give me a link with a stable version pls
Claudiu
Did you previously have a version 4 installed?
Here's 4.0.5490. It's not official so probably not what I'd considered "stable" - though I do run it in my own home and don't experience any issues.
Claudiu
posted this
14 January 2015
Well i didnt get to choose what version i have.. pressed the download button and that was it..
Give me a link with a stable version pls
Or better yet tell me in which file i have to remove and what exactly pls
Or both
Claudiu
Ryan-Scott
posted this
14 January 2015
Actually, I take it back... it's not a bug per-se - the problem is that you apparently had a version 4.0 pre-release going that added a new field to your DB that makes it incompatible with your current version 3.
You'd need to go back to version, or find a db editor program and remove the "batteryLevel" field from the zwavedevices table.
Claudiu
posted this
14 January 2015
ok. waiting here
Regards
Claudiu
Ryan-Scott
posted this
14 January 2015
There are some weird file references in there z:\work\mls... never had z drive or anything close
Based on the logfile, this looks like a bug with the latest 4.0 pre-release. I'll try to get you a fix for it today.
Claudiu
posted this
14 January 2015
There are some weird file references in there z:\work\mls... never had z drive or anything close
Claudiu
posted this
14 January 2015
reset the stick again, added only 1 device, the same... still the device shows in the tool
https://gist.github.com/anonymous/cb59f5be47eb1c21966b
Claudiu
